Patio Screen Door Repair 11 Things Youre Not Doing

Patio Screen Door Repair - How to Do it Yourself

A damaged or worn screen door is not just ugly; it's also a an ideal entrance point for flies, mosquitoes and other pests. While there are services that will repair your patio screen door, it's quite simple to complete the job yourself.

Lay the screen flat on a work surface. Remove the handle from that side by taking out the screws holding it in the position.

Damaged Screens

It's not too surprising that your door or window screens will begin to develop holes and tears due to weather animals, children, and pets. These damaged parts are not only ugly, but also allow pests and flies into your home. Repairing these issues is easy. While patch kits and screen repair tapes offer an easy fix for minor damage, these products aren't suited to larger problems. This step-by-step guide will explain how to replace and repair your screen windows and doors.

The first thing to do is evaluate the damage. Is the frame salvageable or does it require to be replaced? energy-efficient patio door is important to take into consideration this as the frames of window and door screens are more susceptible to being damaged than the mesh. A bent frame may cause the screen to fall out of alignment, causing holes or weak spots.

Once you've determined whether the frame is salvageable or not, you can start addressing the mesh itself. To accomplish this you'll require some essential tools. A spline roller that presses the spline into the frame a utility knife and scissors are all required for this procedure. These tools will ensure precision and durability when you do repairs.

If you have a large hole in your screen, start by removing as much possible of the old material to create a new space. Then, cut a patch of the new screen material so that it is at a minimum half inch larger than the damaged area. Match the patch to the grid pattern of your window, in the event that it has one. Trim the edges to eliminate any imperfections. Fold over the edges of spline to conceal them.

When purchasing your replacement screen, you should take into consideration the climate of your region. Aluminum screens are strong and resistant to snags while fiberglass mesh is popular for its low cost and flexibility. You may also wish to select a special insect screen mesh if you live in an area that is plagued with mosquitoes or other insects. Whatever kind of insect screen you pick, be sure you stretch it tightly across the frame to avoid wrinkles or sagging.

Broken Rollers

A damaged roller on the screen door to your patio can be a harrowing inconvenience. It's not only making it difficult to move your door, but it can also allow bugs and other pests to get into your home. The good news is that repairing the rollers isn't as difficult or costly as replacing the entire door.

Start by inspecting your rollers to identify the issue. You may find that the wheel is flattened or worn out on one end because of the constant contact with track. You can try to remove the wheels by inserting an screwdriver between the roller and the bracket. If you're still unable to remove the roller you can spray the shaft with WD-40 and try it again.

It's also a good idea to examine the tracks, both at the top and bottom. You can straighten bent tracks by hammering a piece of wooden against the bent section. It is essential to wash the tracks well as they can collect grit and dust.

Once you've identified the type roller that is broken, you can buy the replacement. Bring your old rollers to the hardware store so you are sure you're buying the correct type. If your door has more than one roller, you will need to buy enough to replace them all.

Use a screwdriver on the inside of the door frame near the rollers to loosen the screws or bolts for adjustment. Once the screws are loose, you can take the rollers from the bottom of the door. This task should be done by a third party so that you don't have to make use of your hands.





After the new roller has been installed after installation, the door can be lowered back to its original position and the adjustment screws or bolts can be tightened. Be energy-efficient patio door to check the alignment of the rollers and the track, too. If everything is in the right place, your patio screen should slide in place easily.

Damaged Frame

There are many ways to repair your screen door that is to stop it from rubbing against the frame. Make sure the hinges are tight. A hinge that is loose could cause doors to bind, which means it will stop when you open or close the door. If they're loose, tighten the hinge screws. If this does not work then you may need to sand the top of the frame.

A rotting frame is another common issue with screens. It can be expensive to repair as the frame will have to be replaced. To avoid this, keep on the lookout for any indications of decay. Make sure to treat them as soon as you notice them. Check for signs of rot by looking for soft wood that appears darker than the rest of the frame. Keep an eye out for any areas where the wood is beginning to warp or bow. Call a professional if you observe any of these issues.

Repairing damaged frames by using mesh patch kits costing between $2 to $7. The kit comes with small pieces of mesh and glue that you can use to repair any holes in the screen. If the damage is not too significant you could also try fixing it with a wood filler. To accomplish this, you'll have to apply the wood filler to the affected area and wait for it be dry before sanding it smooth.

If you want a solution that is more permanent you can opt for frame lifts, which is a metal structure that is bolted onto your existing frame and lifts it up. It is a costly alternative, but it is the best if your frame has been severely damaged or rotted.

You can create a simple leg for your screen door using scraps of wood or an old photo frame display stand. Connect wires or brackets to the back to hang the frame on the wall. You can also add a piece of felt on the bottom to protect the wall from scratches.

Broken Splines

A broken screen spline can be just as frustrating to manage as a damaged frame or door. It might seem like an issue that can be ignored. But if you allow it to linger for too long, pests like mosquitoes and flies may slip through. This could quickly turn into an even bigger issue and result in more expensive repairs or even a new screen door.

The positive side is that replacing the damaged spline can be relatively simple and affordable, especially when you already have the equipment. Before you can begin, you'll need to take out the old spline off the screen door frame. This can be done by placing the screen door frame flat on a surface like a table or ground. Take the spline off using the screwdriver. If the spline is particularly worn or brittle you may find that it breaks as you try to remove it from the groove.

When you're removing the old spline make sure that you take off any caulking used to keep the spline in place. This will ensure that the new spline fits properly in the grooves.

Make use of a utility knife to trim the screen around the frame after you have removed the old spline. This will ensure that you get an even, clean fit on all sides of the frame once you install the new spline.

Installing the new spline is simple once you have cleaned the frame and cut the new screen material to the appropriate size. Begin with one of the short sides of the frame. Roll the spline into the screen channel using the splining device. Continue rolling the spline and pushing it into the screen channel as you move. Continue this process on each side of the frame. While you are working, use tape or spring clamps to ensure that the screen stays taut.

Repeat the process on the other side after you have completed the splining of all the short sides. Then, you can finish by splining both the top and bottom edges of the frame.